• Code: 65:01
• Description: Communication Failure.
• Remedy: Unplug the power cable from the printer and check the cable connections (Parellel, USB and Network cables). Plug in the power cable again and check if the Error Code has disappeared.

• Code: 65:04
• Description: Generic Firmware Error (Communication Failure).
• Remedy: Upgrade the printer to the latest firmware release.

• Code: 66:02:1
• Description: Horizontal clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
• Remedy: Make sure the image size is within the selected WIDTH of the sheet.

• Code: 66:02:2
• Description: Vertical clipping. May happen when multi-pick occurs and two sheets are loaded together and they do not completely overlap.
• Remedy: Make sure the image size is within the selected LENGTH of the sheet.

• Code: 71:03
• Description: Generic Firmware Error (Out of memory).
• Remedy: Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
  If the Error Code reappears, check for a new Firmware release.

• Code: 71:14
• Description: Out-of-memory while trying to process the firmware upgrade file. Probably this is a firmware bug, because the firmware should free up enough memory to perform the firmware upgrade process correctly.
• Remedy: Perform an emergency firmware upgrade

• Code: 72:04
• Description: Generic Firmware Error (expected).
• Remedy: Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared.
  If the Error Code reappears, check for a new Firmware release.

• Code: 74:12
• Description: Firmware bug in the firmware upgrade process
• Remedy: Download the special file in order to update the bootlog.