Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 130

Code: 01:10

Description: Electronics Module failure.
Remedy: Replace the Electronics Module

Code: 01:11

Description: The Electronics Module is incorrectly positioned.
Remedy: Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.

Code: 01:12

Description: Electronics Module failed during the firmware upgrade OR the Electronics
Remedy: Module failed during initialization.

Code: 02:10

Description: Carriage failure.
Remedy: Replace the Carriage Assembly

Code: 02:10

Description: Carriage failure.
Remedy: Replace the Carriage Assembly

Code: 04:13

Description: Generic Firmware Error (Network Card).
Remedy: Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue

Code: 08:11

Description: Front Panel cannot be detected.
Remedy: Reconnect the Front Panel.

Code: 11:10

Description: Trailing Cable Failure.
Remedy: Replace the Carriage Assembly. Replace the Electronics Module
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie