Danh mục sản phẩm

Code :

Code: 020006
Description: The refill position in the Y-axis is not calibrated.

Code: 020010
Description: Problem with fine movement of the Y-axis motor.

Code: 020011
Description: Error during initialization of the Y-axis.

Code: 040601
Description: The MIO card does not support the MIO 6 protocol. Cards with version 5 or below can not be used with this plotter. Version 5.1 cards behave as expected but do not support PML instructions. Install the latest version.

Code: 040xxx
Description: MIO Card Error

Code: 050000
Description: The Line Sensor has problems finding the Mark Encoder.

Code: 060000
Description: The Line Sensor is not functioning properly because there is too much ambient light.

Code: 060100
Description: Incorrect Line Sensor type in the EEROM.

‹ First < 2 3 4 5 6 7 >

0