Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 3000CP — Trang 5/7

Code: 020006

Description: The refill position in the Y-axis is not calibrated.

Code: 020010

Description: Problem with fine movement of the Y-axis motor.

Code: 020011

Description: Error during initialization of the Y-axis.

Code: 040601

Description: The MIO card does not support the MIO 6 protocol. Cards with version 5 or below can not be used with this plotter. Version 5.1 cards behave as expected but do not support PML instructions. Install the latest version.

Code: 040xxx

Description: MIO Card Error

Code: 050000

Description: The Line Sensor has problems finding the Mark Encoder.

Code: 060000

Description: The Line Sensor is not functioning properly because there is too much ambient light.

Code: 060100

Description: Incorrect Line Sensor type in the EEROM.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie