Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 3800CP — Trang 3/7

Code: 010040

Description: The Ambient Temperature measured is out of the normal range.

Code: 010042

Description: The status of one of the opticalsensors is not stable when it should be. Error data (X): 0 -Problem with the Media Sensor. 1 -Problem with the Pinch-arm Sensor. 2 -Problem with the Refill Assembly Sensor. 3 -Problem with the Elevator Sensor. 4 -Problem with the Service Station Sensor. 5 -Problem with the Primer Sensor.

Code: 010043

Description: Problem with theCarriageBoard.

Code: 010100

Description: Error reading the EEROM.

Code: 010101

Description: An action outside the EEROM limits has been performed.

Code: 010102

Description: Physical EEROM write and/or write operations failed. The EEROM data that is written does not match the data that is read.

Code: 010110

Description: The content of the permanent configuration area of theEEROM is not valid when theprinter is initialized in Service Mode.

Code: 010111

Description: The content of the User configuration area of the EEROM is not valid when the printer is initialized.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie