Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet 500 — Trang 2/6

Code: 05:09

Description: Formatter installed instead of HP-GL/2 Accessory Card.
Remedy: Power OFF the Printer and remove the Formatter and install the HPGL/2 Accessory Card

Code: 05:10

Description: Formatter not detected. Formatter failure.
Remedy: Power OFF the Printer and reseat the Formatter.

Code: 05:11

Description: Formatter not detected.
Remedy: Power OFF the Printer and reconnect the Formatter.

Code: 08:11

Description: Front Panel cannot be detected.
Remedy: Reconnect the Front Panel.

Code: 11:11

Description: Trailing Cable badly connected.
Remedy: Reconnect the Trailing Cable correctly.

Code: 11:13

Description: Problem with setting the voltage of the Printheads.
Remedy: Check that the Trailing Cable is connected correctly at both ends. Replace the Trailing Cable Replace the Carriage Assembly

Code: 12:11

Description: A short detected in the Carriage Assembly.
Remedy: Remove ALL the Printheads and clean the flex contacts on the Printheads and in the Carriage Assembly. Replace ALL the Printheads. Replace the Carriage Assembly

Code: 21:10

Description: Service Station failure. The possible cause could be: 1. The steps counted by the Service Station motor are not consistent with the expected length of the current movement. 2. The Aerosol Fan has reached its maximum current limit. 3. The Service Station motor has shutdown because of blockage.
Remedy: Replace the Service Station/Aerosol Fan Assembly
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie