Mã lỗi HP DesignJet 700
Description: Window sensor circuitry not operating correctly.
Remedy: Check window sensor switch. Check that the sensor cable is connected to the front panel PCA.
Description: Bail sensor indicates the bail is up when it should be down.
Remedy: Use the bail sensor test to help troubleshoot.
Description: Bail sensor indicates the bail is down when it should be up.
Remedy: Use the bail sensor test to help troubleshoot. Check for a sticky sensor flag.
Description: Bail is falling down (missing the detent).
Remedy: Check for Mechanical problems. Perform the Bail Calibration.
Description: ROM test failure.
Remedy: Replace EPROMs. Replace main PCA.
Description: DRAM test failure.
Remedy: Replace main PCA.
Description: Swath RAM test failure.
Remedy: Replace main PCA.
Description: EEROM test failure.
Remedy: Replace EEROM. Replace main PCA.