Mã lỗi HP DesignJet 90
Code:
Tất cả lỗi (58)
01:10
01:11
01:12
02:10
02:10
04:13
08:11
11:10
11:11
21:10
22:10
270:00
271:00
272:00
273:00
274:00
275:00
35:01
42:10
56:10
58:10
61:05
61:05
64:04
65:01
65:04
66:02:1
66:02:2
71:03
71:14
72:04
74:12
79:04
81:01
81:01
83:01:1
83:10
85:10
86:01
86:11
941:02:1
941:02:2
941:02:3
941:02:4
941:02:5
94:02:1
94:02:3
94:02:4
94:02:5
94:02:6
94:02:7
94:02:8
94:04
94:08
94:10
95:00
95:02
95:04
Description: Electronics Module failure.
Remedy: Replace the Electronics Module
Description: The Electronics Module is incorrectly positioned.
Remedy: Reseat the Electronics Module by Removing it from the Printer and installing it again in the correct position.
Description: Electronics Module failed during the firmware upgrade OR the Electronics
Remedy: Module failed during initialization.
Description: Carriage failure.
Remedy: Replace the Carriage Assembly
Description: Carriage failure.
Remedy: Replace the Carriage Assembly
Description: Generic Firmware Error (Network Card).
Remedy: Unplug the power cable from the printer and wait a few seconds. Plug in the power cable again and check if the Error Code has disappeared. If the error code continue
Description: Front Panel cannot be detected.
Remedy: Reconnect the Front Panel.
Description: Trailing Cable Failure.
Remedy: Replace the Carriage Assembly. Replace the Electronics Module