Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Remove the printheads and check that they are the correct ones for this printer. 3. Check that the printer has the latest firmware version; if not, update the firmware to the latest version. 4. Replace the printheads.
Causes: There is a cable connection problem with the Take-Up Reel.
Remedy: 1. If you want to continue using the Take-Up Reel, you must turn off the printer and check that all Take- Up Reel cables are connected (sensor cables, printer cable). 2. If not, cut the substrate and then manually unload it from the Take-Up Reel.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.