Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet T1120 — Trang 7/11

Code: 75.2:YZ

Description: Preventive Maintenance kit #2
Preventive Maintenance Kit #2 counter active.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. • Change the Service Station You should change Preventive Maintenance Kit #2. • Once the parts have been changed, use the Service Menu to reset the counters that affect PMKit #2. See 4. Reset Life Counters, Page 4-63.

Code: 75.3:YZ

Description: Preventive Maintenance kit #3
Preventive Maintenance Kit #3 counter active (Cutter Assembly).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. • Change the Cutter Assembly using Preventive Maintenance Kit #3. Note that the PMkit is the same as the Cutter Assembly. • Once the parts have been changed, use the Service Menu to reset the counters that affect PMKit #3.

Code: 75.4:YZ

Description: Preventive Maintenance kit #4
Preventive Maintenance Kit #4 counter active.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. • Change the Trailing Cable using Preventive Maintenance Kit #4. Note that the PMkit is the same as the Trailing Cable. • Once the parts have been changed, use the Service Menu to reset the counters that affect PMKit #4.

Code: 76:YZ

Description: Disk Full
Hard disk drive is full.
Remedy: • Remove any unnecessary files from the hard disk using the web server.

Code: 77:YZ

Description: Web access application
Web access application. The web server is not functioning correctly.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 78.1:YZ

Description: Media Settings
Media settings area missing in media settings file.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Update the OMES.

Code: 78:YZ

Description: Borderless
Borderless printing not possible. Setting ignored.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Send the plot again.

Code: 79.1:YZ

Description: Recoverable Firmware Error
Recoverable firmware error that does not stop the printing process.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie