Description: Maintenance Cartridge not inserted correctly
Remedy: • Open the Maintenance Cartridge door on the right-hand side of the printer, make sure that the maintenance cartridge is correctly seated, then close the door. • If the problem persists, replace the Maintenance Cartridge.
Description: Take-up Reel (TUR) communication failure
Remedy: • If you want to continue using the TUR, turn off the printer and check that all TUR cables are connected (sensor cables, printer cable). • If not, you may need to unload the paper from the TUR manually. Remember to cut the paper first (either manually or by pressing the Form Feed and Cut key).
Remedy: • Check there is no obstacle between the Take-up reel optical sensors. • Check the paper is attached to the TUR spindle. • Check the TUR switch is in the correct position. • If needed, use the TUR arrow keys to wind paper before resume printing. • To resume printing, press OK.
Remedy: • Check that there is no interference around the TUR optical sensors. • Check the paper is attached to the TUR spindle. • Check the TUR switch is in the correct position. • Check there is no obstacle between the TUR optical sensors. • If required, use the TUR arrow keys to wind paper before resuming the print. • When the jam is cleared, printing is resumed. Press the OK key to clear the warning message.