Remedy: The cable is loose or bad.
The DC controller PCA is defective.
– Replace the DC controller PCA.
The formatter PCA is defective.
The paper input PCA is defective.
The main motor is defective.
There is inadequate site power (or the problem may be the result of thunderstorms). Examine the surge protector.
– Replace the DC controller PCA and/or the formatter PCA if necessary.
Remedy: The printer is in Intelligent Off mode.
– Press the front panel button, or open the top door.
Power is not supplied to the printer.
– Check the power cord connections and the power source.
Print an engine test print to determine if the print engine is functional.
– If the test is successful, replace the formatter PCA.
Check fuses FU101 and FU201 on the DC controller PCA.
– Replace if necessary.
The DC controller PCA is defective.
The connector between the DC controller and the formatter PCA is defective.
– Replace the connector.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.