Remedy: There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
The paper size selection does not match the installed paper.
One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.
Remedy: There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
The paper size selection does not match the installed paper.
One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.
Remedy: There are defective connections.
– Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
The paper size selection does not match the installed paper.
One of the cassettes is overfilled or improperly adjusted.
– Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.
Remedy: (68 SERVICE) -NVRAM full.
– Perform a nonvolatile random-access memory (NVRAM) initialization by holding down [Reset] for more than 20 seconds while turning on the printer. The formatter PCA is defective.
Remedy: (68 SERVICE) -NVRAM full.
– Perform a nonvolatile random-access memory (NVRAM) initialization by holding down [Reset] for more than 20 seconds while turning on the printer. The formatter PCA is defective.
Remedy: A temporary error has occurred.
– Power cycle the printer.
The laser scanner assembly is not seated. The laser scanner assembly is defective.
– Replace the laser scanner assembly.
Remedy: A temporary error has occurred.
– Power cycle the printer.
The scanning assembly is improperly fitted.
A problem has occurred with the scanner cable.
The laser scanner assembly is defective.
The DC controller PCA is defective.
Remedy: The cable is loose or bad.
The DC controller PCA is defective.
– Replace the DC controller PCA
The formatter PCA is defective.
The paper input PCA is defective.
The main motor is defective.
There is inadequate site power (or the problem may be the result of thunderstorms). Examine the surge protector.
– Replace the DC controller PCA and/or the formatter PCA if necessary.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.