• Code: 09
• Image:
• Description: Error 41.1
• Remedy: There are defective connections.
  – Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
  The paper size selection does not match the installed paper.
  One of the cassettes is overfilled or improperly adjusted.
  – Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.

• Code: 10
• Image:
• Description: Error 41.2
• Remedy: There are defective connections.
  – Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
  The paper size selection does not match the installed paper.
  One of the cassettes is overfilled or improperly adjusted.
  – Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.

• Code: 11
• Image:
• Description: Error 41.3
• Remedy: There are defective connections.
  – Reseat J205, J206, J207, and laser scanner connections. There is a paper multifeed or the wrong size of paper is being used.
  The paper size selection does not match the installed paper.
  One of the cassettes is overfilled or improperly adjusted.
  – Remove the paper from the cassette. Readjust the cassette. The paper does not meet HP specifications.

• Code: 12
• Image:
• Description: Error 68
• Remedy: (68 SERVICE) -NVRAM full.
  – Perform a nonvolatile random-access memory (NVRAM) initialization by holding down [Reset] for more than 20 seconds while turning on the printer. The formatter PCA is defective.

• Code: 13
• Image:
• Description: Error 68.1
• Remedy: (68 SERVICE) -NVRAM full.
  – Perform a nonvolatile random-access memory (NVRAM) initialization by holding down [Reset] for more than 20 seconds while turning on the printer. The formatter PCA is defective.

• Code: 14
• Image:
• Description: Error 51
  (beam detect)
• Remedy: A temporary error has occurred.
  – Power cycle the printer.
  The laser scanner assembly is not seated. The laser scanner assembly is defective.
  – Replace the laser scanner assembly.

• Code: 15
• Image:
• Description: Error 52
  (scanner malfunction)
• Remedy: A temporary error has occurred.
  – Power cycle the printer.
  The scanning assembly is improperly fitted.
  A problem has occurred with the scanner cable.
  The laser scanner assembly is defective.
  The DC controller PCA is defective.

• Code: 16
• Image:
• Description: Error 55
• Remedy: The cable is loose or bad.
  The DC controller PCA is defective.
  – Replace the DC controller PCA
  The formatter PCA is defective.
  The paper input PCA is defective.
  The main motor is defective.
  There is inadequate site power (or the problem may be the result of thunderstorms). Examine the surge protector.
  – Replace the DC controller PCA and/or the formatter PCA if necessary.