Danh mục sản phẩm

Code :

Code: E2
Image:
Description: A door is open
Remedy: Verify that the print-cartridge door is fully closed.

Code: E3
Image:
Description: The print cartridge is missing or is not installed correctly.
Remedy: Install the print cartridge.D

Code: E4
Image:
Description: The product memory is full
Remedy: The job is too complex for the product to print. Simplify the job, or divide it into multiple files.

Code: E5
Image:
Description: The product did not pick up paper from the tray.
Remedy: You might need to clean or replace the pickup roller.

Code: E7
Image:
Description: Fuser error
Remedy: 1. Turn off the product or disconnect the power cord from the product. 2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product. 3. Wait for the product to initialize. 4. If the error persists, replace the component.

Code: E8
Image:
Description: Scanner error
Remedy: 1. Turn off the product or disconnect the power cord from the product. 2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product. 3. Wait for the product to initialize. 4. If the error persists, replace the component.

Code: E9
Image:
Description: Engine communication error
Remedy: 1. Turn off the product or disconnect the power cord from the product. 2. Wait 30 seconds, and then turn on the product or reconnect the power cord to the product. 3. Wait for the product to initialize. 4. If the error persists, replace the component.

Code: H0
Image:
Description: The product is in manual-feed mode.
Remedy: Load the correct paper type and size into the input tray.

< 1 2 3 >

0