Danh mục sản phẩm

Code :

Code: -
Display: Load tray <TYPE>, <SIZE>
Description: The tray is empty.
Remedy: Load the tray with the correct type and size of paper.

Code: -
Display: Manual duplex
Description: The product is processing a manual duplex job.
Remedy: To print the second side, place the pages face down in the tray with the top edge first.

Code: -
Display: Manual feed <SIZE>, <TYPE>
Description: The product is set for the manual feed mode.
Remedy: Load the tray with the correct size and type of paper, or press the OK button to use the paper that is in the tray.

Code: -
Display: Memory is low
Description: The product does not have enough memory to process the job.
Remedy: If the product is processing other jobs, send the job again after those jobs have finished. If the problem continues, turn off the power by using the power switch, and then wait at least 30 seconds. Turn on the power and wait for the product to initialize.

Code: -
Display: Misprint
Description: The product has experienced an internal hardware error.
Remedy: Press the OK button to continue. Job output might be affected.

Code: -
Display: No paper pickup
Description: The product has experienced an internal hardware error.
Remedy: Press the OK button to continue. Job output might be affected.

Code: -
Display: Page too complex
Description: The product could not print the current page because of its complexity.
Remedy: Press the OK button to clear the message. Allow the product to finish the job, or press the Cancel button to cancel the job

Code: -
Display: Printer jam clear paper path
Description: The product has detected a jam in the input tray.
Remedy: Clear the jam from the area indicated in the message, and then follow the control panel instructions.

< 1 2 3 >

0