Danh mục sản phẩm

Code :

Code: 01
Display: The Ready and Attention lights are on.
Description: The printer has experienced a fatal error.
Causes:

Code: 02
Display: The Ready light is off and the Attention light is on.
Description: Engine error
Causes: • Communication error • DCC memory error • Unknown engine firmware error

Code: 03
Display: The Ready light is blinking and the Attention light is on.
Description: Power error
Causes: • Low-voltage power supply (LVPS) • Power outage detected

Code: 04
Display: The Ready light is on and the Attention light is blinking.
Description: Fuser error
Causes: • Bad fuser • Low fuser • Slow fuser • High fuser • Fuser drive • Fuser release lever • Low fuser temp 2 • High fuser temp 2 • Low fuser temp 3 • High fuser temp 3

Code: 05
Display: The Ready and Attention lights are blinking.
Description: General engine error
Causes: General engine error

Code: 06
Display: The Ready and Attention lights are cycling on and off.
Description: Sensor error
Causes: • Sensor dirty • Level sensor error • Bad TOP sensor

Code: 07
Display: The Ready light is blinking and the Attention light is off.
Description: Motor rotation error
Causes: • Bad fuser motor start • Bad fuser motor • Bad drum motor start • Bad drum motor rotation • Bad developer motor start • Bad developer motor rotation • Bad main motor start • T2 clutch error • Bad main motor • Bad developer motor • T1 alienation

Code: 08
Display: The Ready and Attention lights are off.
Description: Laser failure
Causes: Laser failure

0