Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M252dw Pro Color — Trang 14/15

Code: 59.XX

Display: 59.XX Error
Description: The product has experienced an error with one of the internal motors. • 59.30 = Fuser motor startup error • 59.40 = Fuser motor rotation error • 59.70 = Black developer motor startup error • 59.71 = Cyan developer motor startup error • 59.72 = Magenta developer motor startup error • 59.73 = Yellow developer motor startup error • 59.80 = Black developer motor rotation error • 59.81 = Cyan developer motor rotation error • 59.82 = Magenta developer motor rotation error • 59.83 = Yellow developer motor rotation error • 59.90 = ETB motor start error • 59.99 = T2 clutch error • 59.A0 = ETB motor rotation error • 59.C0 = Developer motor rotation error • 59.F0 = Transfer alienation failure
Remedy: 1.Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds. b. Turn on the power and wait for the product to initialize. 2. If you are using a surge protector: a. Power off the printer. b. Remove the surge protector. c. Plug the product directly into the wall socket and turn the product power on. 3. If the error persists, replace the product.

Code: 65.1200

Display: 65.1200
Description: External device operation error (65.12XX)
Remedy:

Code: 66.0015

Display: 66.0015
Description: External device communication error
Remedy:

Code: 66.1200

Display: 66.1200
Description: External device critical error (66.12XX)
Remedy:

Code: 79

Display: 79 Error
Description: The product has experienced an internal firmware error. Under most conditions, the product automatically restarts.
Remedy: 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds. b. Turn on the power and wait for the product to initialize. 2. If you are using a surge protector: a. Power off the printer. b. Remove the surge protector. c. Plug the product directly into the wall socket and turn the product power on. 3. If the error is intermittent, attempt to isolate the issue to something specific in the customers environment. NOTE: If the 79 Error is caused by the network or a specific file, do not replace the product; it will not resolve the issue. Instead, attempt to isolate the issue in a way that demonstrates the error is caused by something in the environment. 4. If the error persists, replace the product. 5. If the error persists after product replacement, escalate to Level 3 so that Technical Marketing has visibility to the problem.

Code: 79.0000

Display: 79.0000
Description: 79 service, firmware exception
Remedy:

Code: 79.0001

Display: 79.0001
Description: 79 service, firmware ASIC fault
Remedy:

Code: 90.1101

Display: 90.1101
Description: The cable from the print engine to the formatter is not connected
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie