Các lỗi thường gặp

Code :
  • Code: -
  • Display: Door open
  • Description: One of the product doors is open.
  • Remedy: 1. Make sure that the door is completely closed. 2. If the error persists, replace the engine controller.
  • Code: -
  • Display: Engine comm. Error
  • Description: An internal communication error has occurred.
  • Remedy: 1. Verify that the connectors on the engine controller are seated firmly. 2. Replace the engine controller.
  • Code: -
  • Display: Engine error. Press OK to continue.
  • Description: An internal error has occurred.
  • Remedy: If the error persists, replace the engine controller.
  • Code: -
  • Display: Jam in <location>
  • Description: Paper has jammed in the indicated location. Clear the jam, and then if the error persists, try the following solutions.
  • Remedy: 1. Verify the pickup roller and separation roller are working correctly and not damaged. If necessary, replace the rollers. 2. Verify that connector J116 on the engine controller is firmly seated.
  • Code: -
  • Display: Load paper
  • Description: The product does not detect paper in the tray.
  • Remedy: 1. Verify that paper is correctly loaded in the tray. 2. Verify that all engine controller connectors are firmly seated.
  • Code: -
  • Display: Print failure
  • Description: The product cannot process the page.
  • Remedy: 1. Perform an NVRAM initialization. 2. Update the firmware. 3. Replace the formatter PCA.
  • Code: 10.0000
  • Display: 10.XXXX Supply memory error
  • Description: The memory tag (e-label) on one of the print cartridges or the imaging drum is damaged or missing.
    Black cartridge e-label error
  • Remedy: 1. Replace the supply item. 2. Verify that connector J124 on the engine controller is firmly seated. 3. Replace the engine controller.
  • Code: 10.0001
  • Display: 10.XXXX Supply memory error
  • Description: The memory tag (e-label) on one of the print cartridges or the imaging drum is damaged or missing.
    Cyan cartridge e-label error
  • Remedy: 1. Replace the supply item. 2. Verify that connector J124 on the engine controller is firmly seated. 3. Replace the engine controller.
 1 2 3 4 >  Last ›
popup

Số lượng:

Tổng tiền:

Danh mục