• Code: -
• Display: Load tray # <TYPE> <SIZE>
• Description: A tray is configured for the paper type and size that the print job is requesting, but that tray is empty.
• Remedy: Load the correct paper into the tray, or press the OK button to use paper in a different tray.

• Code: -
• Display: Load tray 1 plain <SIZE> Cleaning Mode [OK] to start
• Description: The product is ready to process the cleaning operation.
• Remedy: Load Tray 1 with plain paper in the size indicated, and then press the OK button.

• Code: -
• Display: Load tray <X> Press [OK] for available media
• Description: The tray is empty.
• Remedy: Load paper into the tray to continue printing. Press the OK button to select a different tray.

• Code: -
• Display: Load tray 1 <TYPE> <SIZE>
• Description: No trays are configured for the paper type and size that the print job is requesting.
• Remedy: Load the correct paper into Tray 1, or press OK to use paper in a different tray.

• Code: -
• Display: Magenta cartridge low
• Description: The print cartridge is nearing the end of its useful life.
• Remedy: Printing can continue, but consider having a replacement supply on hand.

• Code: -
• Display: Magenta in wrong position
• Description: The print cartridge is installed in the incorrect slot.
• Remedy: Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow.

• Code: -
• Display: Magenta very low
• Description: The print cartridge is at the end of its useful life. A customer configurable option on this product is "Prompt to Remind Me in 100 pages, 200 pages, 300 pages, or never." This option is provided as a customer convenience and is not an indication these pages will have acceptable print quality.
• Remedy: To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.

• Code: -
• Display: Manual duplex Load tray <X> Press [OK]
• Description: The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side.
• Remedy: Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you and then press the OK button.