Code :

Code: -
Display: Manual feed <TYPE> <SIZE> Press [OK] for available media
Description: The product is set for manual feed mode.
Remedy: Press the OK button to clear the message or load the correct paper into Tray 1.

Code: -
Display: Memory is low Press [OK]
Description: The product memory is almost full.
Remedy: Press the OK button to finish the job, or press the Cancel button to cancel the job. Break the job into smaller jobs that contain fewer pages.

Code: -
Display: Misprint Press [OK]
Description: Paper has been delayed as it moves through the product.
Remedy: Press the OK button to clear the message. To avoid this problem, try the following solutions: 1. Adjust the paper guides in the tray. Make sure the front paper guide is pushing the paper against the back edge of the tray. 2. Use paper that meets HP specifications. Store paper unopened in its original packaging. 3. Use the product in an area that meets the environmental specifications for this product.

Code: -
Display: Print failure, press OK. If error repeats, turn off then on.
Description: The product cannot process the page.
Remedy: Press the OK button to continue printing the job, but output might be affected. If the error persists, turn the power off and then on. Resend the print job.

Code: -
Display: Remove shipping locks from cartridges
Description: A print cartridge shipping lock is installed on one or more print cartridges.
Remedy: Pull the orange tab to remove the shipping lock from the cartridge.

Code: -
Display: Replace <color>
Description: The print cartridge is at the end of its useful like, and the product is customer-configured to stop printing when it reaches the very low state.
Remedy: To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary.

< 1 2 3 4 5 6 7 > Last ›