Code :

Code: 40.00.01
Display: 40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description: The USB buffer has overflowed.
Remedy: Touch the OK button to print the transferred data (some data might be lost). Check the host configuration.

Code: 40.00.02
Display: 40.00.02 Embedded I/O buffer overflow To continue, touch “OK”
Description: The product has experienced a JetDirect buffer overflow.
Remedy: Touch the OK button to print the transferred data (some data might be lost). Check the host configuration.

Code: 40.00.03
Display: 40.00.03 EIO <X> buffer overflow To continue, touch “OK”
Description: Too much data was sent to the EIO card in the specified slot (x). An incorrect communications protocol might be in use.
Remedy: Touch the OK button to print the transferred data (some data might be lost).

Code: 40.00.04
Display: 40.00.04 EIO <X> bad transmission To continue, touch “OK”
Description: The connection between the product and the USB device has been broken.
Remedy: Touch the OK button to clear the error message and continue printing. Remove, and then reinstall the USB device.

Code: 40.00.05
Display: 40.00.05 Embedded I/O bad transmission To continue, touch “OK”
Description: The USB device has been removed.
Remedy: Touch the OK button to clear the error message. (Data will be lost.) Install the USB device.

Code: 41.02.00
Display: 41.02.00 Error
Description: A beam detected misprint error.
Remedy: Turn the product off, and then on. If the error persists, replace the laser/scanner assembly.

Code: 41.03.YZ
Display: 41.03.YZ Unexpected size in envelope feeder To use another tray, touch "Options"
Description: The product detected a different paper size than expected. -Y = 0 Size mismatch. Detected media is longer or shorter than expected. -Y = A Size mismatch. Detected media too long. -Y = B Size mismatch. Detected media too short. -Y = C Size mismatch. Inter-page gap error. -Z = D Source is duplexer -Z = E Source is envelope feeder -Z = 2 Source is Tray 2 -Z = 3 Source is Tray 3 -Z = 4 Source is Tray 4 -Z = 5 Source is Tray 5
Remedy: Make sure that the feeder is loaded with the correct paper size and that the sliding paper guides are correctly adjusted. Use the Tray/Bin manual sensor test to verify that the envelope feeder paper sensor (PS1802) is correctly functioning. If the error persists, replace the envelope feeder.

Code: 41.03.YZ
Display: 41.03.YZ Unexpected size in tray <X>
Description: The product detected a different paper size than expected. -Y = 0 Size mismatch. Detected media is longer or shorter than expected. -Y = A Size mismatch. Detected media too long. -Y = B Size mismatch. Detected media too short. -Y = C Size mismatch. Inter-page gap error. -Z = D Source is duplexer -Z = E Source is envelope feeder -Z = 1 Source is Tray 1 -Z = 2 Source is Tray 2 -Z = 3 Source is Tray 3 -Z = 4 Source is Tray 4 -Z = 5 Source is Tray 5
Remedy: Make sure that the tray is loaded with the correct paper size and that the sliding paper guides are correctly adjusted. Use the Tray/Bin manual sensor test to verify that the cassette media switch is correctly functioning. If the error persists, replace the lifter assembly.