• Code: 47.FC.31
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Drum Speed Adjustment Store image failure
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 47.FC.32
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Drum Speed Adjustment Image not found
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 47.FC.33
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Drum Speed Adjustment Print engine execution failure
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 47.FC.40
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Pulse Width Modulation Image not found at system initializatione
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 47.FC.41
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Pulse Width Modulation Store image failure
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 47.FC.42
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Pulse Width Modulation Image not found
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 47.FC.430
• Display: 47.WX.YZ Printer calibration error To continue, press OK
• Description: The device is unable to access or implement one of the image patterns files. Y = calibration type, Z = event
  Pulse Width Modulation Print engine execution failure
• Remedy: Turn the product off, and then on. If the error persists, reload the firmware.

• Code: 49.XX.YY
• Display: 49.XX.YY To continue, turn off then on
• Description: A firmware error has occurred.
• Remedy: 1. Turn the product off, and then on. 2. If the error returns, check the following: The error might be caused by a network connectivity problem. Damaged interface cable Damaged USB port Invalid network configuration setting The error might be caused by the print job. Invalid print driver problem with the software application Problem with the file 3. If the error persists, perform a firmware upgrade.