Display: 62.00.00 No system To continue turn off then on
Description: The product experienced an internal system failure.
Remedy: 1. Turn the printer off, then on.2. If the error persists, reload the firmware. If the error still persists, perform a firmware upgrade.3. If the firmware upgrade does not resolve the problem, replace the hard disk.
Description: An Embedded HP JetDirect print server critical error has occurred.
Remedy: 1. Turn the printer off, and then on.2. Remove the RJ45 cable.3. Turn the printer off, and then on.4. Reconnect the RJ45 cable.5. If the error persists, replace the formatter.
Description: The video interface has been detected. Communication with the Control Panel has been detected. This message is a normal part of booting up and establishing communication with the control panel.
Description: The video interface has NOT been detected. Communication with the Control Panel has not been established in the expected time frame. The control panel likely will not display properly.
Remedy: 1. Turn the printer off and then on.2. Turn the printer off by holding down the power button for at least 10 seconds.3. Ensure Control Panel Connectors at Control panel are properly seated. Power cycle device with long press of power button. If Formatter status LED is Yellow, Control Panel may be defective.4. Replace the Control Panel.