Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M604dn Enterprise — Trang 24/27

Code: 81.YY.ZZ

Display: 81.YY.ZZ EIO-1 Card Failure
Description: An EIO error has occurred. - 81.01.80 No heartbeat - 81.01.81 Reclaim timeout - 81.01.82 Invalid data length - 81.01.8B Invalid max outstanding - 81.01.8C Invalid channel mapping - 81.03.01 No PGP buffers - 81.03.02 Channel table full - 81.03.03 Producer index not reset - 81.03.04 Consumer index not reset - 81.03.05 Queue position size - 81.03.06 Transport overflow - 81.03.07 No overflow packets - 81.03.08 Invalid identify response - 81.03.09 Invalid channel map return - 81.03.10 Invalid reclaim return status - 81.03.12 Datagram invalid buffer - 81.03.13 Max stream channels - 81.03.14 Max datagram channels - 81.03.15 Card reset failed - 81.03.16 Self test failure - 81.03.17 Unknown PGP packet - 81.03.18 Duplicate I/O channelt code)
Remedy: Turn the product off, and then on. If the error persists, replace the EIO device.

Code: 82.73.46

Display: 82.73.46
Description: A hard disk or compact flash disk cleaning failed. Usually caused by a failure of the disk hardware.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 82.73.47

Display: 82.73.47
Description: A hard disk or compact flash disk cleaning failed. Usually caused by a failure of the disk hardware.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 98.00.01

Display: 98.00.01 Corrupt data in firmware volume
Description: Data corruption has occurred in the firmware volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.

Code: 98.00.02

Display: 98.00.02 Corrupt data in solutions volume
Description: Data corruption has occurred in the solutions volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware

Code: 98.00.03

Display: 98.00.03 Corrupt data in configuration volume
Description: Data corruption has occurred in the configuration volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.

Code: 98.00.04

Display: 98.00.04 Corrupt data in job data volume
Description: Data corruption has occurred in the job data volume
Remedy: Turn the product off, and then on. Rerun the file erase function.

Code: 99.00.01

Display: 99.00.01 Upgrade not performed file is corrupt
Description: A remote firmware upgrade (RFU) was not performed. CRC error in the firmware image (bad image).
Remedy: Download the RFU file and attempt the upgrade again.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie