Code :

Code: 81.YY.ZZ
Display: 81.YY.ZZ EIO-1 Card Failure
Description: An EIO error has occurred. - 81.01.80 No heartbeat - 81.01.81 Reclaim timeout - 81.01.82 Invalid data length - 81.01.8B Invalid max outstanding - 81.01.8C Invalid channel mapping - 81.03.01 No PGP buffers - 81.03.02 Channel table full - 81.03.03 Producer index not reset - 81.03.04 Consumer index not reset - 81.03.05 Queue position size - 81.03.06 Transport overflow - 81.03.07 No overflow packets - 81.03.08 Invalid identify response - 81.03.09 Invalid channel map return - 81.03.10 Invalid reclaim return status - 81.03.12 Datagram invalid buffer - 81.03.13 Max stream channels - 81.03.14 Max datagram channels - 81.03.15 Card reset failed - 81.03.16 Self test failure - 81.03.17 Unknown PGP packet - 81.03.18 Duplicate I/O channelt code)
Remedy: Turn the product off, and then on. If the error persists, replace the EIO device.

Code: 82.73.46
Display: 82.73.46
Description: A hard disk or compact flash disk cleaning failed. Usually caused by a failure of the disk hardware.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 82.73.47
Display: 82.73.47
Description: A hard disk or compact flash disk cleaning failed. Usually caused by a failure of the disk hardware.
Remedy: 1. Turn the product off, and then on. 2. Use the Clean Disk item in the Preboot menu. 3. Reload the firmware.

Code: 98.00.01
Display: 98.00.01 Corrupt data in firmware volume
Description: Data corruption has occurred in the firmware volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.

Code: 98.00.02
Display: 98.00.02 Corrupt data in solutions volume
Description: Data corruption has occurred in the solutions volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware

Code: 98.00.03
Display: 98.00.03 Corrupt data in configuration volume
Description: Data corruption has occurred in the configuration volume
Remedy: Turn the product off, and then on. Use the Clean Disk item in the Preboot menu. Reload the firmware.

Code: 99.00.01
Display: 99.00.01 Upgrade not performed file is corrupt
Description: A remote firmware upgrade (RFU) was not performed. CRC error in the firmware image (bad image).
Remedy: Download the RFU file and attempt the upgrade again.

‹ First < 21 22 23 24 25 26 27 >