• Code: 33.01.04
• Display: 33.01.04
• Description: A table from the ICB could not be found in the current firmware. The table data was ignored.
• Remedy: This is an informational message, and no action is required.

• Code: 33.01.05
• Display: 33.01.05
• Description: A table from the ICB has different data than the table with a matching ID in the current firmware. The table data was ignored.
• Remedy: This is an informational message, and no action is required.

• Code: 33.02.01
• Display: 33.02.01
• Description: A used part with data was replaced in the device. Used board/disk installed.
• Remedy: Turn the product power off, and then on again. If the error persists, please escalate this problem to your Global Business unit.

• Code: 33.02.02
• Display: 33.02.02
• Description: A Save/Recover status error has occurred on the product and one, or both, of the Save/Recover features are disabled.
• Remedy: Turn the product power off, and then on again. If the error persists, please escalate this problem to your Global Business unit.

• Code: 33.02.03
• Display: 33.02.03
• Description: The Save/Recover backup feature has failed, and the Save/Recover features are disabled, but the product continues to function.
• Remedy: Turn the product power off, and then on again. If the error persists, please escalate this problem to your Global Business unit.

• Code: 33.03.01
• Display: 33.03.01
• Description: The controller encountered an unexpected data length for the Storage ID value.
• Remedy: Turn the product power off, and then on again. If the error persists, please escalate this problem to your Global Business unit (return the product ICB to the Global Business unit with a full diagnostic log from the product).

• Code: 33.03.02
• Display: 33.03.02
• Description: The controller encountered an unexpected data length value for the engine to recover the DCC NVRAM value.
• Remedy: Turn the product power off, and then on again. If the error persists, please escalate this problem to your Global Business unit (return the product ICB to the Global Business unit with a full diagnostic log from the product).

• Code: 33.WX.YZ
• Display: 33.WX.YZ Used board/disk installed
• Description: An encrypted board or disk with existing data previously locked to a different product has replaced the original. If you continue, data is permanently lost.
• Remedy: - To save the data on the board or disk, turn the product off. Replace the board or disk with another board or disk. - To delete the data on the board or disk and continue, press the OK button.