• Code: 32.1C.29
• Display: 32.1C.29
• Description: Reset of networking subsystem failed.
• Remedy: Turn the product off, and then on and retry

• Code: 32.1C.2B
• Display: 32.1C.2B
• Description: Reset formatter time-out.
• Remedy: Turn the product off, and then on and retry

• Code: 32.1C.2E
• Display: 32.1C.2E
• Description: Reset engine time-out.
• Remedy: Turn the product off, and then on and retry

• Code: 32.1C.2F
• Display: 32.1C.2F
• Description: Reset failure.
• Remedy: Turn the product off, and then on and retry

• Code: 32.21.00
• Display: 32.21.00
• Description: Corrupt firmware in external accessory.
• Remedy: Turn the product off, and then on and retry. If the error persists, clear the firmware image from the active partition by using the Partial Clean item in the Preboot menu.

• Code: 33.01.01
• Display: 33.01.01
• Description: Read back data from ICB and pass to SR clients so that they can recover occurred Information.
• Remedy: This is an informational message, and no action is required.

• Code: 33.01.02
• Display: 33.01.02
• Description: Save data received from SR clients is written into ICB NVRAM initial-save-occurred Information.
• Remedy: This is an informational message, and no action is required.

• Code: 33.01.03
• Display: 33.01.03
• Description: Save and Recover functionality OK after previously being disabled. Save/Recover status OK Information.
• Remedy: This is an informational message, and no action is required.