Code :

Code: 33.03.02
Display: 33.03.02
Description: The controller encountered an unexpected data length value for the engine to recover the DCC NVRAM value.
Remedy: Turn the product power off, and then on again. If the error persists, please escalate this problem to your Global Business unit (return the product ICB to the Global Business unit with a full diagnostic log from the product).

Code: 40.00.01
Display: 40.00.01 USB I/O buffer overflow To continue, touch “OK”
Description: The USB buffer overflowed during a busy state.
Remedy: 1. Touch the OK button to print the transferred data. Some data might be lost. 2. Check the host configuration.

Code: 40.00.02
Display: 40.00.02 Embedded I/O buffer overflow To continue, touch “OK”
Description: Too much data was sent to the embedded HP Jetdirect print server. An incorrect communications protocol might be in use.
Remedy: 1. Touch the OK button to print the transferred data. Some data might be lost. 2. Check the host configuration.

Code: 40.00.04
Display: 40.00.04 Unsupported USB accessory detected To continue, touch “OK”
Description: The connection between the product and the USB device has been broken.
Remedy: Press the OK button to clear the error message and continue printing. Remove, and then reinstall the USB device.

Code: 40.00.05
Display: 40.00.05 Embedded I/O bad transmission To continue, touch “OK”
Description: The USB device has been removed.
Remedy: Press the OK button to clear the error message. (Data will be lost.) Install the USB device.

Code: 40.0X.05
Display: 40.0X.05 USB storage accessory removed
Description: X = 1, 2, 3, 5, or 6; information code The USB storage accessory was removed.
Remedy: No action necessary.

Code: 41.01.YZ
Display: 41.01.YZ
Description: An unknown misprint error occurred on the product. Y = Type, Z = Tray
• Y = 0: Photo Media (1, 2, or 3) • Y = 1: Auto Sense (Normal) • Y = 2: Normal (typed not from Auto Sense) • Y = 3: Light media 1, 2, or 3 mode • Y = 4: Heavy media 1 • Y = 5: Heavy media 2 • Y = 6: Heavy media 3 • Y = 7: Glossy media 1 • Y = 8: Glossy media 2 • Y = 9: Glossy media 3 • Y = A: Glossy film • Y = B: OHT • Y = C: Label • Y = D: Envelope 1, 2, or 3 mode • Y = E: Rough • Y = F: Other mode • Z = 0: From unknown tray • Z = 1: From Tray 1 • Z = 2: From Tray 2 • Z = 3: From Tray 3 • Z = 4: From Tray 4 • Z = 5: From Tray 5 • Z = 6: From Tray 6 • Z = 7: From Tray 7 • Z = 8: From Tray 8 • Z = 9: From Tray 9 • Z = D: From duplexerN†
Remedy: Turn the product power off, and then on again.