Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet M775f Enterprise 700 color MFP — Trang 8/47

Code: 13.00.00

Display: 13.00.00
Description: Generic jam event code.
Remedy: Check the product for a jam.

Code: 13.80.A1

Display: 13.80.A1
Description: Stapler/stacker inlet sensor stay jam. The inlet sensor SR9 does not detect the trailing edge of paper within a specified period after it detects the leading edge.
Remedy: 1. Open right-upper door, and then remove any jammed media. 2. Make sure that the paper meets HP specifications. 3. Check for an obstruction in the paper path inside the right upper door. 4. Defeat the upper right door sensors SW1, and then print a page. Verify that the stapler/stacker input rollers turn. If the rollers do not turn, replace the feed guide assembly.

Code: 13.80.D1

Display: 13.80.D1
Description: Stapler/stacker inlet sensor delay jam. The inlet sensor SR9 does not detect the leading edge of paper within a specified period after the leading edge reaches the fuser output sensor PS6 in the product.
Remedy: 1. Open right-middle door, and then remove any jammed media from the fuser. 2. Make sure that the paper meets HP specifications. 3. Check for an obstruction in the paper path inside the right upper door. 4. Defeat the upper right door sensors SW1, and then print a page. Verify that the stapler/stacker input rollers turn. If the rollers do not turn, replace the feed guide assembly.

Code: 13.80.F1

Display: 13.80.F1
Description: Stapler/stacker inlet sensor residual jam. The inlet sensor (SR9) detects a presence of paper when the printer is turned on.
Remedy: 1. Open right-middle door, and then remove any jammed media-make sure to also check the fuser area. 2. If the error persists, replace the feed guide assembly.

Code: 13.80.FF

Display: 13.80.FF
Description: Stapler/stacker inlet sensor residual jam. The inlet sensor (SR9) detects a presence of paper when the printer is turned on.
Remedy: 1. Open right-middle door, and then remove any jammed media from the fuser. 2. Open right-upper door, and then remove any jammed media. 3. If the error persists, replace the feed guide assembly.

Code: 13.84.A1

Display: 13.84.A1 Jam in lower bin area
Description: Stapler/stacker outlet sensor 1 stay jam. The media feed sensor SR2 does not detect the leading edge of the media within a specified period after the leading edge reaches the inlet sensor SR9.
Remedy: 1. Open right-upper door, and then remove any jammed media. 2. Make sure that the paper meets HP specifications. 3. Check for an obstruction in the paper path inside the right upper door. 4. If the error persists, replace the operation assembly.

Code: 13.84.F1

Display: 13.84.F1
Description: Stapler/stacker sensor 1 residual jam. The media feed sensor SR2 detects a presence of paper when the product is turned on.
Remedy: 1. Open right-upper door, and then remove any jammed media. 2. If the error persists, replace the operation assembly.

Code: 13.85.A1

Display: 13.85.A1 Jam inside right cover
Description: Stapler/stacker outlet sensor 2 stay jam. The staple tray media presence sensor SR4 detects a presence of media after a specified period from when the stack ejection operation is complete.
Remedy: 1. Open right-upper door, and then remove any jammed media. 2. Make sure that the paper meets HP specifications. 3. Check for an obstruction in the paper path inside the right upper door. 4. If the error persists, replace the operation assembly.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie