Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet P2035 — Trang 3/3

Code: 57

Display: 57 Fan error
Description: The cooling fan (FM1) rotates for approximately 35 seconds at initial start up and during a print job. The fan rotates about 30 seconds after a print job concludes.
Remedy: 1. Turn the product on. Listen to determine if the fan is operating. The fan is located on the upper right-side of the product. 2. Make sure that the fan connector is security connected to J1105 on the connector PCA. 3. Replace the fan.

Code: 59.X

Display: 59.X Error
Description: A malfunction has been detected with the product's main motor. During normal operation, the main motor should rotate for about six seconds after the product is turned on.
Remedy: 1. Turn the product off and then on. 2. Make sure that connector J202 on the engine controller PCA is seated. 3. If the error persists, replace the main motor

Code: 79

Display: 79 Service error
Description: An incompatible DIMM is installed.
Remedy: 1. Turn the product power off. 2. Install a DIMM that the product supports. See Parts and diagrams on page 253 for a list of supported DIMMs. See Install memory (HP LaserJet P2050 Series Printers only) on page 64 for DIMM installation instructions. 3. Turn the product on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie