Code :

Code: 22
Display: 22-USB I/O BUFFER OVERFLOW
Description: The device's USB buffer has overflowed during a busy state.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 40
Display: 40 BAD SERIAL TRANSMISSION
Description: A serial data error (parity, framing, or line overrun) has occurred while the device was receiving data.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 40
Display: 40 EIO X BAD TRANSMISSION
Description: A connection with the card in the EIO slot has broken.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 40
Display: 40 EMBEDDED I/O BAD TRANSMISSION
Description: The connection with the HP Jetdirect embedded print server has broken.
Remedy: 1. Press "OK" to continue printing. 2. If the message persists, contact HP Support.

Code: 41.3
Display: 41.3 UNEXPECTED SIZE IN TRAY
Description: Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.
Remedy: 1. Press "OK" to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again

Code: 41.5
Display: 41.5 UNEXPECTED TYPE IN TRAY X
Description: The device senses a different media type than what is configured in the tray.
Remedy: 1. Press "OK" to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again

Code: 41.X
Display: 41.X ERROR
Description: A device error has occurred.
Remedy: 1. Press "OK" to continue or press "?" for more information. 2. If the message persists after exiting help, turn the device off and then on. 3. If the message persists, contact HP Support.

Code: 49.XXXXX
Display: 49.XXXXX ERROR
Description: A critical firmware error has occurred.
Remedy: 1. Turn the device off and then on. 2. Try to determine whether the error occurs intermittently, while printing, or when turning on the device. 3. If the error appears while printing, determine whether it occurs when printing from a specific computer, a specific application, or a specific file. If all other computers, applications, or files can print without the error, then the problem may be only within one print job or computer. Make sure the computer has the most current printer drivers, or use a generic printer driver. 4. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the device and the device can receive a firmware update, download the newer firmware upgrade. 5. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance. 6. If the message persists, contact HP Support

‹ First < 2 3 4 5 6 7 8 >