Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet Pro M102

Code: 01

Display: The Ready and Attention lights are on.
Description: The printer has experienced a fatal error.
Causes: The printer has experienced a fatal error.

Code: 02

Display: The Ready light is off and the Attention light is on.
Description: Engine error
Causes: • Communication error • DCC memory error • Unknown engine firmware error

Code: 03

Display: The Ready light is blinking and the Attention light is on.
Description: Power error
Causes: • Low-voltage power supply (LVPS) • Power outage detected

Code: 04

Display: The Ready light is on and the Attention light is blinking.
Description: Fuser error
Causes: • Bad fuser • Low fuser • Slow fuser • High fuser • Fuser drive • Fuser release lever • Low fuser temp 2 • High fuser temp 2 • Low fuser temp 3 • High fuser temp 3

Code: 05

Display: The Ready and Attention lights are blinking.
Description: General engine error
Causes: General engine error

Code: 06

Display: The Ready and Attention lights are cycling on and off.
Description: Sensor error
Causes: • Sensor dirty • Level sensor error • Bad TOP sensor

Code: 07

Display: The Ready light is blinking and the Attention light is off.
Description: Motor rotation error
Causes: • Bad fuser motor start • Bad fuser motor • Bad drum motor start • Bad drum motor rotation • Bad developer motor start • Bad developer motor rotation • Bad main motor start • T2 clutch error • Bad main motor • Bad developer motor • T1 alienation

Code: 08

Display: The Ready and Attention lights are off.
Description: Laser failure
Causes: Laser failure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie