Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet Pro M435nw MFP

Code: 10.100X

Description: Supply Memory Error
A specific toner cartridge has a faulty or missing memory chip. "X" indicates the cartridge: 0=black, 1=cyan, 2=magenta, 3=yellow.
Remedy: Check the memory chip. If it is broken or damaged, replace the cartridge. Verify that the cartridge is installed in the correct location. Reinstall the toner cartridge. Turn off and then turn on the product. If the error is with a color cartridge, try swapping it with a different color cartridge in the tray. If the same message displays, then there is an engine problem. If a different 10.100X message displays, replace the cartridge. If the problem is not solved, replace the cartridge.

Code: 13.0000

Description: Paper jam
Remedy:

Code: 20.0000

Description: Memory out
Remedy: 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, break the job into smaller jobs that contain fewer pages. If the error persists, update the firmware. NOTE: For memory-card models, adding memory to the DIMM slot might help solve this problem.

Code: 21.0000

Description: Page misfeed or mispick
Remedy:

Code: 41.2000

Description: Beam detect malfunction
Remedy:

Code: 41.3000

Description: Unexpected size
Remedy:

Code: 49

Description: The product has experienced an internal embedded software error. Under most conditions, the product automatically restarts.
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.

Code: 50.1000

Description: Low fuser temperature error
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie