Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP LaserJet Pro MFP M226 — Trang 4/5

Code: 54.2500

Display: 54.2500
Description: Top-of-page sensor error
Remedy: Verify that the DC controller connectors are firmly connected. If the error persists, replace the DC controller.

Code: 54.XX

Display: 54.XX
Description: The printer has experienced an error with one of the internal sensors. The product may display one of the following messages:• 54.18 Black toner level sensor error• 54.19 TOP sensor error• 54.1200 Black density measurement abnormality• 54.1500 Black CPR pattern cant be read• 54.21 BD errors
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If a surge protector is used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer. If the message persists, contact HP support.

Code: 55.3000

Display: 55.3000
Description: Engine-formatter communication error
Remedy:

Code: 55.4000

Display: 55.4000
Description: Engine communication timeout error
Remedy:

Code: 55.X

Display: 55.X Error
Description: The printer has experienced an internal error. The printer may experience one of the following errors:• 55.0 DC controller communication error• 55.0601 DC controller NVRAM data error• 55.0602 DC controller NVRAM access error• 55.1 DC controller memory errortern ca
Remedy: Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If a surge protector is used, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer.

Code: 57

Display: 57 Fan Error
Description: The product has a general fan error.
Remedy: 1. Press the power button to turn the product off.2. If a surge protector is in use, remove it. Connect the power cord directly into a wall outlet.3. Wait at least 30 seconds, turn the product on, and then wait for the product to initialize.4. If the error persists, reconnect the J1103 connector on the duplex connector PCA.5. If the error persists, replace the main fan.

Code: 57.0000

Display: 57.0000
Description: Fan motor error
Remedy:

Code: 57.0600

Display: 57.0600
Description: Fan motor error
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie