Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Latex 300 — Trang 32/32

Code: 94:01

Description: CLC failed because paper white point is out of valid range
Causes: Paper white point is out of valid range.
Remedy: Call agent: • Ensure the loaded substrate is white and there aren't spots on it.

Code: 94:02

Description: CLC failed, inconsistencies in measures detected
Causes: Inconsistencies in CLC measures detected.
Remedy: Call agent: 1. Check substrate type selection in front panel corresponds to actual substrate loaded. 2. Retry calibration.

Code: 94:08

Description: Color Calibration failed
Causes: Color Calibration failed.
Remedy: Call agent: • Try again or check user manual color calibration troubleshooting.

Code: 94:10

Description: CLC measures out of range
Causes: Aerosol or other malfunction of Color Sensor prevents calibration.
Remedy: Service engineer: 1. Retry calibration. 2. Replace SOL.

Code: 98:03

Description: Potential Print Quality problem. Detected too many nozzles out
Causes: Check PH using the PH status plot.
Remedy: Service engineer: • Use the printhead status plot to find out which printheads have a massive number of nozzles out, and replace them.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie