• Code: 44.16.0E
• Description: Error Event log message (Multifunction product only.). The attachment filename already exists at the destination, and the flag to fail on filename collisions was set. This file will not be sent.
• Remedy: 1. If this is the first time the error has occurred, use a different filename or verify that the filename is not already in use. 2. If the issue persists, use a unique filename or disable the flag to fail on filename collision.

• Code: 44.16.0F
• Description: Error Event log message (Multifunction product only.). Not enough memory to process the current SharePoint Job.
• Remedy: 1. If this is the first time the error has occurred, cancel and/or restart the job, breaking it up into small jobs. 2. Repeat this process if the error persists until job goes through.

• Code: 44.16.10
• Description: Error Event log message (Multifunction product only.). SharePoint server is using an invalid certificate.
• Remedy: 1. If this is the first time the error has occurred, send the SharePoint job to a non-secure address, or send the job to a SharePoint server that has a valid certificate. 2. If the error occurs repeatedly, send the job to a different, trusted SharePoint server.

• Code: 44.16.FF
• Description: Error Event log message (Multifunction product only.). Unexpected error occurred in the SharePoint resource device code.
• Remedy: 1. If this is the first time the error has occurred, verify settings in job configuration and restart the job. 2. If error persists, turn the product off, and then on and retry the job. 3. If error continues, reset to factory settings. Upgrade to current version of firmware.

• Code: 44.34.XX
• Description: Error Event log message (Multifunction product only.). A fax error has occurred.
• Remedy: 1. Try to send the job again. 2. Check the fax configuration

• Code: 44.90.XX, 44.91.XX, 44.92.XX
• Description: 44.90.XX Error Event log message - 44.91.XX Error Event log message - 44.92.XX Error Event log message (Multifunction product only.). A fax error has occurred.
• Remedy: 1. Try to send the job again. 2. Check the fax configuration.

• Code: 45.00.YZ
• Description: Event log entry only All 45.00.YZ events are OXPd/Webkit informational log entries.
• Remedy: No action necessary.

• Code: 47.00.XX
• Description: Back channel internal error.
• Remedy: 1. Turn the product off, and then on again. 2. Resend the print job. 3. If the error persists, clear the active partition by using the Partial Clean item in the Preboot menu.