Description: Fuser (Center ) Abnormal Low Temperature
The temperature on the center part of the Fuser Roller is fallen abnormally. The Fuser Lamp (H1 : For the center part) may be broken, or the Thermostat 1 (TS1) may be open circuited.
Causes: 1. The fusing temperature does not rise up to the specified level within a specified period (rise of 20 degrees centigrade within 5 minutes) since you have turned on the machine. (This will occur in such case when surrounding air is extremely cold in the less power supplying condition.) 2. The fusing temperature becomes colder than 120 degrees centigrade.
Description: Cutter Error
Cutter’s action is abnormal.
Causes: 1. The Cutter is not moved up to its Home Position when you turn on the machine, or during the Cutter Initialization which is taken when you close the Cutter Hatch. 2. The machine can not cut the media within 2 seconds since cutting action has started.