Causes: 1. The temperature of fuser at the time of turning on was 50 to 100C, but it does not rise up to 100oC within 80 seconds after that. 2. The temperature of fuser at the time of turning on was higher than 100C, but it does not rise up to the setting temperature within 150 seconds after that.
Description: Fuser Temperature Abnormal Fall Error
Causes: The Lamp of fuser lights (Signal HEAT1 is “H”) to heat up the Fuser Roller in the ready condition, but even 1C of temperature rise can not be accomplished within 15 seconds.