Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi KIP 8000

Code: E-01

Description: Fuser Temperature Rising Error
Causes: 1. Fuser temperature does not reach to a 120 degrees centigrade within a specific period since you have turned on the machine. 2. Fuser temperature becomes colder than 70 degrees centigrade since the machine has been ready.

Code: E-02

Description: Fuser Over Temperature Error
Causes: Fuser temperature exceeds 200 degrees centigrade.

Code: E-05

Description: Drum Motor Error
Causes: Out of synchronized condition continues more than specific period.

Code: E-06

Description: Counter A/B Error
Causes: 1. The Status Signal continues to be L for more than 100 milliseconds when the Counter is counting. 2. The Status Signal continues to be H for more than 100 milliseconds when the Counter is not counting.

Code: E-07

Description: Cutter Motor Error
Causes: 1. Cutter is still at the home position 0.3 seconds later after the Cutter Motor is turned on. 2. Cutter does not come back at the home position within one second after the Cutter Motor is turned on. 3. Cutter home position is not detected within 2 seconds during Cutter Cleaning operation.

Code: E-13

Description: Paper Feed Motor Error
Causes: Out of synchronized condition continues more than specific period.

Code: E-14

Description: Fuser Motor Error
Causes: Out of synchronized condition continues more than specific period.

Code: E-16

Description: Wire Cleaning Error
Causes: Over-current signal is not detected within 90 seconds after the motor is turned on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie