Causes: 1. Fusing temperature does not rise up to 120oC within a decided time after turning on. 2. Fusing temperature falls down to 70oC after once getting ready.
Causes: 1. Counter Control Signal Feed Back (IN_CNT_A or IN_CNT_B) continues to be L for 1 second or longer when the Counter should count up. 2. Counter Control Signal Feed Back (IN_CNT_A or IN_CNT_B) continues to be H for 1 second or longer when the Counter is not counting up.
Causes: 1. Cutter remains at its home position although 0.3 seconds has passed since the Cutter Motor has started the operation. 2. Cutter does not arrive at its home position although 1 second has passed since the Cutter Motor has started the operation. 3. Home position can not be detected for 2 seconds during cutter cleaning.