Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi KIP K105 — Trang 2/3

Code: E-020

Description: Counter Error
Causes: The Counter Connection Detection Signal (COUNT_OPN) continues to be “L” for 1 second or longer after turning on.

Code: E-031

Description: Image Corona Output Error
Causes: The Image Corona Output Detection Signal (IM_LD) continues to be “L” for 1 second or longer when the Image Corona is ON.

Code: E-032

Description: Separation Corona Output Error
Causes: The Separation Corona Output Detection Signal (AC_LD) continues to be “L” for 1 second or longer when the Separation Corona is ON.

Code: E-033

Description: Transfer Corona Output Error
Causes: The Transfer Corona Output Detection Signal (TR_LD) continues to be “L” for 1 second or longer when the Transfer Corona is ON.

Code: E-034

Description: Developer Bias Output Error
Causes: The Developer Bias Output Detection Signal (BIAS_LD) continues to be “L” for 1 second or longer when the Developer Bias is supplied to the Developer Unit.

Code: E-040

Description: Cutter Error
Causes: 1. The Cutter Home Sensor Signal (MSCUT_L or MSCUT_R) does not change to “H” within 100 millisecond since the Cutter has started the operation. 2. The Cutter Home Sensor Signal (MSCUT_L or MSCUT_R) does not change to “L” within 1 second since the Cutter has started the operation.

Code: E-050

Description: FPGA Error
Causes: Initialization of FPGA is failed after turning on.

Code: E-070

Description: Developer Error
Causes: 1. The Connector J-253 is not connected. 2. The Switch (MS4) is “open” condition, which detects open/close of Engine Unit or Toner Hatch.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie