Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi KIP K115 — Trang 2/3

Code: E-16

Description: Wire Cleaning Error
Causes: Over-current can not be detected although 90 seconds has passed since the Wire Cleaning Motor had started to work.

Code: E-21

Description: Fuser Thermostat Error
Causes: Thermostat is open-circuited.

Code: E-23

Description: LED Head Cleaning Error
Causes: Over-current can not be detected although 90 seconds has passed since the LED Cleaning Motor had started to work.

Code: E-26

Description: Surface Potential Control Error
Causes: When the Auto SP Control fails in adjusting the surface potential to within the acceptable range.

Code: E-27

Description: Density Sensor Error
Causes: When the initialization of Density Sensor could not be achieved successfully during Density Lock process.

Code: E-28

Description: Density Control Error
Causes: When the Auto Density Control fails in adjusting the density to within the acceptable range.

Code: E-30

Description: Developer Disconnection Error
Causes: When the connector in Process Unit is disconnected.

Code: E-43

Description: RFID (IC Tag) Error
Causes: When the FRID PCB is defective
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie