Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi KIP K57

Code: E01

Description: Fuser (Center ) Abnormal Low Temperature
The temperature on the center part of the Fuser Roller is fallen abnormally. The Fuser Lamp (H1 : For the center part) may be broken, or the Thermostat 1 (TS1) may be open circuited.
Causes: 1. The fusing temperature does not rise up to the specified level within a specified period (rise of 20 degrees centigrade within 5 minutes) since you have turned on the machine. (This will occur in such case when surrounding air is extremely cold in the less power supplying condition.) 2. The fusing temperature becomes colder than 120 degrees centigrade.

Code: E02

Description: Fuser (Center) Abnormal High Temperature
Causes: The temperature on the center part of the Fuser Roller is risen abnormally.

Code: E04

Description: Developer Motor Error
The Developer Motor is having some error.
Causes: 1. The Developer Motor is overloaded. 2. The high voltage may be leaking anywhere.

Code: E05

Description: Main Motor Error
The Main Motor is having some error.
Causes: 1. The Main Motor is overloaded. 2. The high voltage may be leaking anywhere.

Code: E06

Description: Mechanical Counter Error
Causes: The Counter is not connected to the machine.

Code: E07

Description: Cutter Error
Cutter’s action is abnormal.
Causes: 1. The Cutter is not moved up to its Home Position when you turn on the machine, or during the Cutter Initialization which is taken when you close the Cutter Hatch. 2. The machine can not cut the media within 2 seconds since cutting action has started.

Code: E13

Description: Paper Feeding Motor Error
The Paper Feeding Motor is having some error.
Causes: 1. The Paper Feeding Motor is overloaded. 2. The high voltage may be leaking anywhere.

Code: E14

Description: Fuser Motor Error
The Fuser Motor is having an error.
Causes: 1. The Fuser Motor is overloaded because of exit area jam or some other reason. 2. The high voltage may be leaking anywhere.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie