Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica 1212

Code: 04

Description: PTC heater. Don't know what this is, but "0" means it is not installed. 1 means it is.

Code: F09

Description: Power leakage of some kind. Heat, exposure, AC or power supply or main relay. Go to "25 mode" and select "P49" and reset to "0"

Code: F23

Description: Toner motor

Code: F26

Description: Toner density adjustment problem. This means the machine is undertoned. To repair, replace developer and enter "47" mode. Press 51. Press print. Allow the machine to cycle until it stops. Some feel you should disconnect the toner motor first. This code happens probably because either the machine wasn't set up properly, or because the customer kept using the machine with the light on.

Code: F28

Description: Corona problem. Could be any corona.

Code: F34

Description: High fuser temperature.

Code: F35

Description: Low fuser temperature.

Code: F36

Description: Low fuser temperature.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie