Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 215 — Trang 2/3

Code: C3452

Description: Warming-up failure (sub)
- The thermistor/2 (TH2) detected that the temperature of the surface of the fusing roller did not reach the specified level even after the lapse of given period of time has passed during warm-up.
Remedy: 1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing unit, DCPU and MFPB for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change MFPB. 6 Change DCPU.

Code: C3751

Description: Abnormally high fusing temperature (main)
- The temperature detected by the thermistor/1 (TH1) is over the specified temperature for more than the specified period of time after power is turned ON.
Remedy: 1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing unit, DCPU and MFPB for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change MFPB. 6 Change DCPU.

Code: C3752

Description: Abnormally high fusing temperature (sub)
- The temperature detected by the thermistor/2 (TH2) is over the specified temperature for more than the specified period of time after power is turned ON.
Remedy: 1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing unit, DCPU and MFPB for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change MFPB. 6 Change DCPU.

Code: C3851

Description: Abnormally low fusing temperature (main)
- The temperature detected by the thermistor/1 (TH1) is below the specified temperature for more than the specified period of time.
Remedy: 1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing unit, DCPU and MFPB for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change MFPB. 6 Change DCPU.

Code: C3852

Description: Abnormally low fusing temperature (sub)
- The temperature detected by the thermistor/2 (TH2) is below the specified temperature for more than the specified period of time.
Remedy: 1 Check the fusing unit for correct installation. 2 Check the open/close operation of the right door. 3 Check the fusing unit, DCPU and MFPB for proper connection and correct or change as necessary. 4 Change fusing unit. 5 Change MFPB. 6 Change DCPU.

Code: C4001

Description: Faulty HSYNC (SOS)
- The SOS sensor does not detect a rising edge of SOS within a given period of time after the polygon motor has started turning and a laser output has been started.
- The SOS sensor detects no falling edges of SOS while VIA (image area control) is ON.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between PH unit-MFPB P001, P002 for proper connection and correct as necessary. 3 Change PH unit. 4 Change MFPB.

Code: C4101

Description: Polygon motor rotation malfunction
- A HIGH polygon motor lock signal is not detected within a given period of time that begins 0.5 sec. after the polygon motor has started turning.
- A LOW polygon motor lock signal is detected for a continuous given period of time while the rotation of the polygon motor remains stabilized.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between PH unit-MFPB P001, P002 for proper connection and correct as necessary. 3 Change PH unit. 4 Change MFPB.

Code: C5102

Description: Main motor malfunction
- The main motor (M1) lock signal remains HIGH for a continuous 1-sec. period after 1- sec. after the main motor has started turning.
Remedy: 1 Check the connector between M1-MFPB P006 for proper connection and correct as necessary. 2 Check M1 for correct drive coupling and correct as necessary. 3 M1 operation check. 4 Change MFPB. 5 Change DCPU
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie