Description: Wireless LAN destination initialization error. When an initialization error occurred on the settings of the wireless LAN in the upgrade kit (UK-212).
Causes:
Remedy: 1. Check the UK-212 connector for proper connection and correct as necessary. 2. Rewrite the firmware. 3. Reinstall the UK-212.
Description: • CD201: File memory mounting error • CD202: Memory capacity discrepancy • CD203: Memory capacity discrepancy 2 CD201: • The file memory is not mounted. • The file has any abnormality. CD202: • File memory capacity on the MFP board (MFPB) is not enough. • File memory capacity necessary for duplex printing is not enough. CD203: • File memory capacity on the MFP board (MFPB) is not enough.
Causes: • MFP board (MFPB) • DIMM (DIMM: UK-211)
Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Replace the DIMM. 3. Replace MFPB.
Description: • CD211: PCI-SDRAM DMA operation failure • CD212: Compression/extraction timeout detection • CD211: Hardware related to the transfer of memory image of the MFP board (MFPB) fails to respond. • CD212: Hardware related to the BTC compression function of the MFP board (MFPB) fails to respond.
Description: • CD241: Encryption ASIC setting error • CD242: Encryption ASIC mounting error • CD241: Initialization error of the encrypted ASIC is detected during the machine is starting. • CD242: The faulty of the installation of encrypted ASIC is detected during the machine is starting.
Causes: MFP board (MFPB)
Remedy: 1. Check the MFP board connector for proper connection and correct as necessary. 2. Replace MFPB
Description: USB host board failure. • When a failure is detected in USB board included in the local interface kit. • Non-standard USB device is connected.
Causes: • MFP board (MFPB) • USB board (EK-608)
Remedy: 1. Check the operation with another USB device. 2. Check the USB board connector for proper connection and correct as necessary. 3. Replace the USB board. 4. Replace MFPB.
Description: Extension network adapter installation error. • When the 2nd network card settings is set to “Set” but the upgrade kit (UK-212) is not installed. • Upgrade Kit (UK-212) is faulty.
Causes:
Remedy: 1. Check the settings of [Service Mode] -> [Network Settings] -> [2nd Network Setting] -> [2nd network card settings]. 2. Check the UK-212 connector for proper connection and correct as necessary. 3. Rewrite the firmware. 4. Reinstall the UK-212.
Description: i-Option activated and additional memory not installed. While the i-Option is activated, the additional memory (DIMM) included in UK-211 is not installed.
Causes: • MFP board (MFPB) • DIMM (DIMM: UK-211)
Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Replace the DIMM. 3. Replace MFPB.
Description: i-Option activated and additional memory and HDD not installed. While the i-Option is activated, the additional memory (DIMM) included in UK-211 and the HDD are not installed.
Causes: • MFP board (MFPB) • Hard disk (HDD) • DIMM (DIMM: UK-211)
Remedy: 1. Check DIMM for proper connection and correct as necessary. 2. Access [Service Mode] -> [System 2] -> [HDD] and check to see if “Installed” is selected. 3. Replace the DIMM. 4. Replace the hard disk. 5. Replace MFPB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.