Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 235 — Trang 3/3

Code: C5351

Description: Fusing cooling fan motor malfunction
- The fan lock signal remains HIGH for a predetermined continuous period of time while the fusing cooling fan motor (FM1) is turning.
Remedy: 1 Check the connector between FM1-relay CN42-relay CN13-MFPB P013 for proper connection and correct as necessary. 2 Check the fan for possible overload and correct as necessary. 3 FM1 operation check. 4 Change MFPB.

Code: C6101

Description: Scanner home detection failure
- When the power switch is turned ON or a scan operation is completed, detecting the home position fails.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between M3-MFPB P101 for proper connection and correct as necessary. 3 Check M3 for correct drive coupling and correct as necessary. 4 Check the connector between CIS-MFPB P102 for proper connection and correct as necessary. 5 M3 operation check. 6 Change M3. 7 Change CIS. 8 Change MFPB.

Code: C9401

Description: IR exposure lamp malfunction
- When the power switch is turned ON or a scan operation is completed, the light quantity is checked and the shading compensation is performed. At this time, trouble is detected.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between CIS-MFPB P102 for proper connection and correct as necessary. 3 Change CIS 4 Change MFPB.

Code: CC151

Description: Flash ROM error
- The copier determines that there is an error if writing to the flash ROM fails during upgrading of the firmware.
- When the power switch is turned ON, the error indicator lights up steadily and a corresponding message appears on the display.
- If this error message appears, no operations can then be performed. It is not possible to upgrade the firmware from a PC connected through USB connection, either.
Remedy: 1 Check the MFPB connectors for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Perform upgrading of the firmware. 4 Change MFPB.

Code: CC153

Description: Engine flash ROM error
- Data of flash ROM of the engine control system is determined to be faulty.
Remedy: 1 Check the MFPB connectors for proper connection and correct as necessary. 2 Identify the specific firmware that is responsible for the error. 3 Perform upgrading of the firmware. 4 Change MFPB.

Code: CC163

Description: Engine connection failure
- The controller can not communicate with the engine control system.
- Incorrect engine firmware is installed.
Remedy: 1 Turn OFF and ON the power switch. 2 Check whether the correct engine firmware is installed. If not, rewrite the firmware. J.1. Rewriting of firmware 3 Check the MFPB connectors for proper connection and correct as necessary. 4 Change MFPB.

Code: CD301

Description: EEPROM error
- Contact the responsible people of KMBT before taking some countermeasures.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie