• Code: C-1114
• Description: SD: Folding motor (M10) drive abnormality.
  - The folding roller home sensor (PS22) does not turn ON within a specified period of time after M10 turns ON.
• Causes: Folding motor (M10) Folding roller home sensor (PS22) SD control board (SDCB)

• Code: C-1115
• Description: SD: Conveyance motor (M8) drive abnormality.
  - Within a specified period of time after M8 turns ON, the ON of a motor lock signal is detected for a prescribed period of time in succession.
  - A specified period of time after M8 turns OFF, the OFF of a motor lock signal is detected for a prescribed period of time in succession.
• Causes: Conveyance motor (M8) SD control board (SDCB)

• Code: C-1116
• Description: FS-510: Exit roller release motor (M6) drive abnormality.
  - When the shutter is closed, the shutter home sensor (PS16) does not turn ON within a specified period of time after M6 turns ON.
  - When the shutter is open, PS16 does not turn OFF within a specified period of time after M6 turns ON.
• Causes: Exit roller release motor (M6) Shutter home sensor (PS16) FS control board (FSCB)

• Code: C-1117
• Description: FS-510: Alignment motor /Fr (M5) drive abnormality.
  - While in the home position search, the alignment home sensor /Fr (PS7) does not turn ON within a specified period of time after M5 turns ON.
  - While in the home position search, PS7 does not turn OFF within a specified period of time after M5 turns ON.
• Causes: Alignment motor /Fr (M5) Alignment home sensor /Fr (PS7) FS control board (FSCB)

• Code: C-1118
• Description: FS-510: Exit paddle solenoid (SD2) drive abnormality.
  - While in the paddle evacuation, the exit paddle home sensor (PS11) does not turn ON within a specified period of time after SD2 turns ON.
  - While in the paper hold-down operation, PS11 does not turn OFF within a specified period of time after SD turns ON.
• Causes: Exit paddle solenoid (SD2) Exit paddle home sensor (PS11) FS control board (FSCB)

• Code: C-1119
• Description: FS-511: Punch motor (M11) drive abnormality.
  - The punch encoder sensor (PS15) does not turn OFF within a specified period of time after M11 turns ON.
• Causes: Punch motor (M11) FS control board (FSCB)

• Code: C-1120
• Description: FS-511: Hole punch selector motor (M14) drive abnormality (inch system only)
  - When starting the punch 2- hole position switch drive, the hole punch position switch (SW4) is not turned ON in the specified period of time after the M14 is turned ON.
  - When starting the punch 3- hole position switch drive, the SW4 is not turned OFF in the specified period of time after the M14 is turned ON.
• Causes: FS control board (FSCB) Hole punch selector motor (M14)

• Code: C-1121
• Description: PU: Punch motor (M1) drive abnormality.
  - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON.
• Causes: Punch motor (M1) Punch position sensor /1 (PS2) Punch position sensor /2 (PS3) FS control board (FSCB)