Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 502 — Trang 20/25

Code: CC157

Description: Finisher ROM error (RU) • When a communication error is detected between the main body and the horizontal transport unit.
Causes: Transport control board (TRCB) FS control board (FSCB)
Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. 2 Rewrite the firmware. 3 Change TRCB 4 Change DFCB

Code: CC158

Description: Finisher ROM error (ZU) • Data of flash ROM of the z-folding unit is determined to be faulty when the power is turned ON.
Causes: ZU control board (ZUCB)
Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. 2 Rewrite the firmware. 3 Change ZUCB

Code: CC159

Description: ROM contents error upon startup (DSC1) • A fault is detected in a sequence of ROM contents check of the DSC board during starting.
Causes: DSC board (SC-507)
Remedy: 1 Check the DSC board connector for proper connection and correct as necessary. 2 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. 3 Rewrite the firmware. 4 Change DSC board

Code: CC15A

Description: ROM contents error upon startup (DSC2) • A fault is detected in a sequence of ROM contents check of the DSC board during starting.
Causes: DSC board (SC-507)
Remedy: 1 Check the DSC board connector for proper connection and correct as necessary. 2 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. 3 Rewrite the firmware. 4 Change DSC board

Code: CC15B

Description: Finisher ROM error (SD) • Data of flash ROM of the saddle unit is determined to be faulty when the power is turned ON.
Causes: SD drive board (SDDB)
Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. 2 Rewrite the firmware. 3 Change SDDB

Code: CC163

Description: ROM contents error (PRT) • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked.
Causes: Service EEPROM board (SV ERB) Printer control board (PRCB)
Remedy: 1 Rewrite the firmware. 2 Change PRCB 1. Turn OFF the main power switch and replace the current PRCB with a new one. (When using a PRCB of another machine in service, be sure to use a PRCB installed in the same model.) 131 2. Update the PRCB firmware. 3. After completing the firmware update, turn OFF and ON the main power switch and check to see that warm-up is started. 4. When the trouble cannot be solved, reinstall the removed PRCB to the original board. NOTE • When taking the above steps, check whether PRCB is defective or not without replacing the SV ERB. 3 Change SV ERB 1. Replace the current SV ERB with a new one. 139 2. Turn ON the main power switch and check to see that warm-up is started. (One minute is spent to prepare the new SV ERB for use. During the period, the control panel backlight stays off.) 3. Make the specified readjustments. 139 4 If the above actions do not solve the problem, contact KMBT.

Code: CC164

Description: ROM contents error (MSC) • The wrong model of firmware is detected in the MFP board when the main power switch is turned ON.
Causes: Printer control board (PRCB) MFP board (MFPB)
Remedy: 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace the corresponding board. 4 When not reviving even if the above-mentioned procedure is done, contact the responsible people of KMBT.

Code: CC165

Description: ROM contents error (ADF) • When the power is turned ON, DF control board or firmware error is detected.
Causes: DF control board (DFCB)
Remedy: 1 Disconnect and then connect the power cord. Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. 2 Rewrite the firmware. 3 Change DFCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie